CA120 is a 2 x 60 WRMS @ 4 ohm stereo amplifier with a tiny size but amazing remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. It's an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.
Features:
- 2 x 60 W RMS @ 4Ω amplifier
- Universal external power supply
- AUTO STANDBY function: in the absence of an audio signal the unit automatically goes into STANDBY mode, minimising power consumption
- Lightweight, silent, high-performance amplifier (fan-free convection cooling)
- Suitable for stereo and parallel (mono)
- 1 switchable balanced mic / unbalanced line input, with high quality microphone preamplifier, phantom power supply, noise gate and “talkover” function or priority over the rest of input
- 3 stereo lines (not balanced)
- 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Auxiliary output for liaison with other amplifiers or external audio devices
- Local control by digital rotary knob (“encoder”)
- Remote control by infrared remote control
- Remote control by WPmVOL or WPmVOL-SR (0-10 VDC) wall panel
- RS-232 control port, compatible with EclerCOMM software (free) and control protocol CANET
- MUTE port to silence the entire unit by closing external contact
Applications:
- Retail
- Education
- Corporate
- Leisure
Remote port:
The RJ-45 REMOTE type connector allows the connection of a WpaVOL or WpaVOL-SR (control 0-10 VDC) wall control panel to adjust the general output volume and/or to select one of the five active work source modes (LINE 1, LINE 2, MIC, LINE 1 + MIC, LINE 2 + MIC). The connection is made by a standard CAT5 cable between the WpaVOL or WpaVOL-SR wall panel and the REMOTE CA40 connector.
Generelt
- Forstærker type
- Compact amplifier, Power amplifier
Lydspecifikation
- Forstækerkanaler
- 2
- Power/ch (4/8 Ohm)
- 60 W RMS, 4Ω
- Distortion THD
- 0,15 %
- Frequency range Min
- 15 Hz
- Frequency range Max
- 30.000 Hz
- Signal-to-noise ratio
- 85 dB Line, MIC: >65dB
- Indbygget DSP
- Nej
Tilslutninger
- Audio indgange
- 3,5mm tele x1 (L/R Line 2)
- Audio indgange
- 6,3mm tele x1 (Mono Line 3), combined with Euroblock mic / RCA
- Audio indgange
- Euroblock line x1 (Mono Line 3), combined with 6,3mm mic / RCA
- Audio indgange
- RCA x2 (L/R Line 1), (L/R Line 3, combined with mic)
- Audio Udgange
- Euroblock spk. cable
- Audio Udgange
- RCA x2 (L/R AUX Out)
- Bluetooth
- Nej
- Ethernet
- Nej
- WiFi
- Nej
- Kontrol
- DIP-Switch on under side of amp for settings
- Kontrol
- Front buttons
- Kontrol
- PC software EclerCOMM software or CA-NET protocol
- Kontrol
- RS-232
- Kontrol
- WPa control panel Connect a WpaVOL or WpaVOL-SR (optional) for volumen and source control
Energy
- Strømforsyning
- External Power Supply. In: 100-240V @ 50-60Hz, Out: 24 VDC
- Kølemetode
- Convection cooling
- Forbrug Stand-by
- 2,5 W
- Forbrug Typisk
- 24 W
- Forbrug Max
- 52 W
- Auto Standby function
- Ja
Dimensioner og vægt
- Bredde
- 160 mm
- Dybde
- 210 mm
- Højde
- 48 mm
- Nettovægt
- 0,95 kg
Yderligere oplysninger
- Installation
- Ceiling, Freestanding/Shelf, Table, Wall
- Inkluderet tilbehør
- REVO-IR remote control, DC Power Adapter
- Garanti
- 5 år
Forpakningsinfo
- Forpaknings størrelse
- 351 x 230 x 68 mm
- Forpaknings vægt
- 1,74 kg
